Payment & Shipping Terms:
|Mterial:||Stainless Stee: 201, 202, 205, 304,304L, 316, 316L, 321 Duplex/Hastelloy C-276 Aluminum: Pure Aluminum , Aluminum Alloy Nickel: Pure Nickel, Nickel Alloy2080, Monel PP: Polypropylene PE: Polyethylene PTFE/TELFON/F4 F46||Diameter:||DN300mm ~ DN6000mm.|
|Thcikness/height:||100mm/150mm/200mm||Difference Between Normal/drawer Demister:||Mormal Demister Usded Inside Tower, While Drawer Demister Used Outside Of Tower|
1.What is Wire Mesh Demister Pad
Wire mesh demister also called mist eliminator, is essential in many process operations for the removal of entrained material in vapor flows. Demister pads provide a wide range of solutions suitable for any application.
Wire mesh demister pads are made up knitted gauze pad and support grid of two parts.
|Material||Code||Standard NO.||Material||Code||Standard NO.|
Non-metallic materials: PTFE (F6) polyethylene, polypropylene, Nylon yarn, glass fiber and PVC and so on.
Note: use other materials bearing the note when ordering
|Brass Wire||H68, H65||GB3100|
|Nickel||N4, N6, N7, N8||GB3120|
|Titanium and Titanium Alloy||TA2, TA3, TC3, TC4||GB3823
2. What does a demister pad look like
Demister pads has a variety of shapes and sizes and can be installed horizontally or vertically. A typical horizontal demister pads made from steel knitted wire mesh, several feet in diameter and standard thickness is 4" and 6". Fine diameter wires which are typically ~0.0090 inches in diameter are interlocked by weaving machines to form a mesh pad with a high free volume (97% to 99+% void fraction) . A "tight" mesh (a lower void fraction and more dense) is more effective, i.e., it captures smaller diameter liquid
droplets vs. an "open" mesh, less dense mesh with a greater void fraction.
3.Demister pad fuction
5. Drawer Demister Pad Brief Introduction
The drawer style HG/T21586 demister pad is mainly composed of rectangular bar that made of wire mesh and wire mesh flat plate instead of the original circular network block.
when using in the outside of the tower body only needs to be set 1 to N demolition mouth, the stripe screen block can be directly insert along the rail insert (maintenance).
Its selection of the nominal diameter range has of DN300mm ~ DN6000mm.
u D stands for nominal diameter
u H stands for height or thickness of demister pads
u The weight is calculated according to stainless steel,stainless steel density is 7.93g/cm3,nickel density
is 8.90g/cm3,PP or PE density is 0.92g/cm3
9.Our unique features:
1) our have our owned wire drawing line to ensure the high-qualitified weaving
2) lines of machine can satisfy different customers with large quantity
3)good reputation of professional manufacturer, we are the largest factory for knitted wire mesh in ANPING-HOMETOWN OF WIRE MESH ALL OVER THE WORLD
4)EXPERIENCED staff can control weaving inspection easily
5) best service after sales, to solve prioblem for you
Contact Person: Mrs Meredith