 |
|
|
|
Certification
- I'm Online Chat Now
Plain Weave Stainless Steel Knitted Wire Mesh High Corrison Resistance
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Material: | Stainless Steel 316/316L/430/904L/duplex | Density: | 8/9/12 LBS/CUFT |
|---|---|---|---|
| Wire: | Monofilament Or Doule Wire Or Muti Strands | Color: | Bright Silver |
| Characteristics: | Less Carbon Content; High Corrison Resistance In SEA WATER AND CHEMICAL SOLUTION | Sample: | Available & Free Of Charge |
| Shape: | Flat/ Crimped Are Both Ok |
2" to 53" Wdith SS316/316L/317L/904L Knitted wire mesh by monofilament/muti strands &9/12ibs/cuft density for filter
| Wire diameter | 0.15mm-0.55mm(common,0.15mm,0.2mm,0.25mm,0.28mm..) | |
| Hole size | (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same,width is different) | |
| The surface of the knitted wire mesh | the flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications) | |
| The common width of knitted wire mesh |
*40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400,500 mm, 600mm, 650mm,900mm,etc. * 20",24",28".30", 36".42".... |
|
| Material of knitted wire mesh | Stainless steel 316,316L,904L,317L,DUPLEX...... | |
| Application | mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding, for manufacturing a filtration device. | |
| Standard type | 40-100 60-150 105-300 140-400 | |
| Highly effective | 60-100 80-100 80-150 90-150 150-300 200-400 | |
| High penetration-type | 20-100 30-150 70-400 100-600 170-560 | |
| Damping | 30-50 48-50 30-60 30-80 50-120 | |
| Common weaving method | Plain weaving | |
| wire | single or double or muti | |
SS316 Chemical composition (%)
| CHEMICAL ELEMENT | C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
|
STANDARD VALUE |
MAX 0.030 |
MAX 1.00 |
MAX 2.00 |
MAX 0.045 |
MAX 0.030 |
10.00 14.00 |
16.00 18.00 |
2.00 3.00 |
||
| MEASURED VALUE | 0.029 | 0.33 | 0.88 | 0.041 | 0.013 | 10.50 | 16.30 | 2.04 |
SS316LCHEMICAL COMPOSITION (%)
| CHEMICAL ELEMENT | C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
|
STANDARD VALUE |
MAX 0.030 |
MAX 1.00 |
MAX 2.00 |
MAX 0.045 |
MAX 0.030 |
10.00 14.00 |
16.00 18.00 |
2.00 3.00 |
||
| MEASURED VALUE | 0.029 | 0.33 | 1.18 | 0.041 | 0.013 | 12.37 | 16.38 | 2.01 |
Difference between SS316 AND SS316L
- carbon content :SS316L is lower than SS316
- intercrystalline corrosion resistance : SS316L is superior to SS316 ( intercrystalline corrosion resistance Is no air condition,such as in sea, in solution
- welding corrosion resistance:SS316 is better than SS316.The phenomenon of carbon accumulation can be produced by high temperature during welding,So the less carbon content and the better corrosion resistance
904L(00Cr20Ni25Mo4.5Cu)KNITTED WIRE MESH
| 904L original Amercia chemical composition (%) | |||||||||
| C | Mn | P | S | Si | Ni | Cr | Mo | Cu | Fe |
| 0.02 Max. |
2.00 Max. |
0.045 Max. |
0.035 Max. |
1.00 Max. |
23.0-28.0 | 19.0-23.0 | 4.0-5.0 | 1.0-2.0 | Standard |
| 904L Similar Grade IN China chemical composition(%) | ||||||||
| C | Mn | P | S | Si | Ni | Cr | Mo | Cu |
| 0.03 Max. |
1.80 Max. |
0.025 Max. |
0.035 Max. |
0.80 Max. |
24.0-26.0 | 19.0-21.0 | 4.0-5.0 |
1.0-2.0
|
| 904L Swidish Chemical composition(%) | ||||||||
| C | Mn | P | S | Si | Ni | Cr | Mo | Cu |
| 0.06 Max. |
2.00 Max. |
0.045 Max. |
0.030 Max. |
1.00 Max. |
24.0-26.0 | 19.0-21.0 | 4.0-5.0 | 3.0-5.0 |
SS904L characteristics
- 00Cr20Ni25Mo4.5Cu steel is mainly developed to solve the corrosion of sulfuric acid.
- It is also resistant to acetic acid corrosion at any temperature and concentration under atmospheric pressure.
- It is also well resistant to corrosion in formic acid, phosphoric acid, and in mixed acids of formic acid and acetic acid
317LSimilar Grade IN China chemical composition(%)
| 317LSimilar Grade IN China chemical composition(%) | |||||||
| C | Mn | P | S | Si | Ni | Cr | Mo |
| 0.03 Max. |
2.0 Max. |
0.045 Max. |
0.030 Max. |
0.80 Max. |
11.0-15.0 | 18.0-20.0 | 3.0-4. |
317L unique characteristics
- 317L(00Cr19Ni13Mo3, UNS S31726) alloy is a molybden-based austenitic stainless steel.stronger corrosion resistance,higher ductility, stress corrosion resistance, compressive strength and high temperature resistance
- low carbon grade or L grade, which has anti-sensitization properties during welding and heat treatment.
- Alloy 317LMN and 317L stainless steel are more resistant to the corrosion of sulfuric acid solution than conventional cr-nickel stainless steel.The corrosion resistance increases with the increase of molybdenum alloy.These alloys can at temperature of 120 ° F (49 ° C) environment by as much as 5% of sulfuric acid concentration.At the temperature lower than 100 ° F (38 ° C) environment, the alloy has excellent corrosion resistance, can resist the corrosion of higher concentration solution.An antioxidant 317 l stainless steel, chrome - nickel - molybdenum steel has excellent oxidation resistance, and in normal atmosphere, the temperature is not higher than 1600-1650 ° F (871-899 ° C), the scale formation rate is low.
- 317LMN (UNS S31726) alloy is a molybden-based austenitic stainless steel with strong resistance to chemical erosion.In addition, compared with conventional stainless steel, 317MN alloy has higher ductility, stress fracture resistance and higher compressive strength at high temperature.It is low carbon grade or L grade, which has the ability to resist sensitization during welding and heat treatment.M and N are higher in molybdenum and nickel, respectively.The content of molybdenum and nickel gives it strong ability to resist spot corrosion and crack corrosion, especially in high temperature acid, chloride and sulfur compounds.Nitrogen content increases its strength.This stainless steel alloy has the highest resistance to water corrosion of all standard grades of stainless steel
Our solid package to protect goods during shippment
our unique features:
1) our have our owned wire drawing line to ensure the high-qualitified weaving
2) lines of machine can satisfy different customers with large quantity
3)good reputation of professional manufacturer, we are the largest factory for knitted wire mesh in ANPING-HOMETOWN OF WIRE MESH ALL OVER THE WORLD
4)EXPERIENCED staff can control weaving inspection easily
5) best service after sales, to solve prioblem for you
Contact Details
Anping Blue Star Metal Wire Mesh Products Co., Ltd
Contact Person: Mrs Meredith
Tel: +8618330876136
Other Products
-
Aluminium Knitted Wire Mesh Wire Dia 0.13 - 0.3mm For EMI & RFI Shielding
-
Monel 400 / Inconel 600 Knitted Metal Mesh Wire Dia 0.1 - 0.3mm For EMI Shielding
-
PP PE PTFE Knitted Metal Mesh Width 6 "- 30 " Wear And Abrasion Resistance
-
Nickel Knitted Wire Mesh Width 6 "- 30 " And Wire Diameter 0.008 - 0.011 " For Filter
-
PP / PE Knitted Wire Mesh 0.2 - 0.25mm Wire 40cm - 120cm For Separation Filtration
-
Custom Stainless Steel Knitted Mesh Narrow Width & Wire Dia 0.008 0.011 "