Payment & Shipping Terms:
|Usage:||Chemical Tower||Material:||Stainless Steel 304/316|
wire mesh mist eliminator,
mist eliminator pads
MESH DEMISTER PAD is wire mesh blanket used to remove process liquid carried over which from's during boiling vacuum evaporations or bubbling Process. it consists of multiple layers of knitted and crimped monofilament ( 0.254 mm) wire mesh fabric. The knitted and crimped mesh increases contact surface and porosity of fabric, prevents blocking and gives constant porosity throughout the metal due to this separation efficiency increases up to 99 % at lower pressure drop & gas velocity.
Increases gas velocity.► Low-pressure drop► Up to 99% Separation efficiency►Improves gaseous phase quality ► No loss of liquid phase products► No limitation in size & shape «Easy to handle & install ► No maintenance or services.
Metals i.e. SS 304, 304L, 316, 316L, 321, 430, Nickel, Monel, Inconel, Incolloy, Hastalloy, Alloy 20, Copper and plastics i.e. Polypropylene, Nylon .Teflon (FEP/PTFE)& Hostaflon.
|DENSITY (KG/M³)||FREE AREA (%)||SURFACE AREA (M²/M³)||EQ. STYLE|
|SUS||P.P||SUS||P.P||SUS||P.P||YORK||NIHON MESH||GOTO SHOJI|
In order to select the most suitable type in condideration of the latest extensive uses of a demister, we generalized the resulets of examining the relevant literatures and of surveying end users, and finallly selected the below standard styles. Please fefer to the below basic styles, and you will be able to have the most suitable type for your purposes and to change necessary specifications.
|DSM-80||It is used for the case that velocity is big, small pressure drop is required, or collection of big particles or high efficiency is not required. High-treatment style|
|DSM-144||It is extensively used for petrochemical plants. Pressure drop is quite small and efficiency is 90-99%|
|DSM-193||It is used a lot as a standard. It shows 1-5m/set 98-99% efficiency with 5-10u particles when it is used as a general use. High-efficiency style|
|DSM-390||Compared with DSM-193, its density is 2 times greater. It is used for the case high efficiency is required. It is necessary especially in case pressure drop is high, but over 90% efficiency at 1m/sec is required.|
|DSM220||It is used for collecting 1u particles. Especially. In the case of low concentration that the quantity of mist(dust) is less then 10g/m³, it is advantageous as much as the thickness goes up (200-300m/m)|
|DSM432||It is used for collecting minute particles of 0.05-1u. It can make better effects than DSM-220S. Ultra-high efficiency style|
Provided at top & bottom of DEMISTER PADS has above 90% free area. Grids helps mesh blanket to remain fix on vessel cleat/rings to works suitably against fluctuated operation conditions. Grids are normally made out of 25x3mm thick flats and 6mm0rods in metals and out of 25x5 mm flats in plastics.
Vacuum Towers, Lube Towers, Distillation Towers, Evaporators, Absorbers, Regenerators, Scrubbers, Strippers, Steam Drums, Moisture Separators, Ventilation Systems, Flame Arresters etc.
Contact Person: Fairy