Payment & Shipping Terms:
|Material:||Monel 400/K500//Hastelloy C276 Etc||Shape:||Round Shape In One Whole; Round Shape Devided Into Small Sections Based On Manhole Size Or Customization|
|Characteristics:||In Acid Medium,Water Corrosion,High Temperature Corrosion,Ammonia.Monel 400 Can Play An Excellent Anti-corrison Performance||Grid/frame:||Yes/no|
|Wire Diameter For Mesh:||Usually 0.25mm;0.28mm,0.2mm||Grid:||25*3 Or 25*6 Flat Steel; 6mm Rod Steel|
|Sample:||Available||Mesh Pad Thickness:||10-200mm ,common Are 150, 200mm|
demister mist eliminator,
wire mesh mist eliminator
Excellent anti-corrosion MONEL/HASTELLAY C276 knitted wire mesh demister/mist eliminator with grid for petrochecmical
1.Wire mesh demister pad /demister pad is made out of knitted wire mesh by metal(MONEL400/Hastelloy c276 /SS...) or plastic material wire(PP.PTFE...)
Knitted wire mesh is a metal wire or plastic strand knitted into a mesh structure in very much the same way as stockings or sweaters. It is in no way related to the woven metal materials familiar to us as fly screens.
Knitting produces mesh of interlocking loops. These loops can move relative to each other in the same plane without distorting the mesh, giving knitted mesh a two-way stretch. This cannot be done with woven meshes, as there is always some form of connection between the wires at the corners of the square openings. From a functional point of view, it is this flexibility that gives knitted mesh its unique advantages for industrial uses.
Flattened mesh is sometimes run through corrugating rolls to create crimped mesh. In this form, the corrugations act like springs for resiliency and give the mesh thickness.
2.Monel demister filter, Monel wire mesh demister with Monel alloy 400 (UNSN04400 or MCu-28-1.5-1.8 or Ni68Cu28Fe) is a kind of sea water, chemical solvent, ammonia sulfur and chlorine, hydrogen chloride, various acid media such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acid, nickel based alloy material has good corrosion resistance, the alkaline medium salt and molten salt. Valor brand monel metal demister filter
3.Monel 400 Physical properties
Monel400 is a dosage biggest USES the most popular comprehensive performance excellent corrosion resistant alloy The alloy in hydrofluoric acid and fluorine gas medium has excellent corrosion resistance, the hot strong alkali and has excellent corrosion resistance At the same time also resistant to neutral solution atmospheric organic compounds such as sea water corrosion An important feature of the alloy is generally do not produce stress corrosion crack, good cutting performance
4.Monel 400 CHEMICAL COMPOSITION
5.Monel 400 Mechanical properties:
6.Corrosion resistance of Monel 400
Corrosion resistance of monel in general than nickel and copper is superior, it is better than pure nickel reducing medium corrosion resistance, oxidation resistance than pure copper corrosion medium, sulfuric acid phosphate carbon corrosion resistance are very good especially chlorhydric acid corrosion resistance, also have excellent corrosion resistance to hot strong alkali Monel400 alloy in fluorine hydrochloric hydrofluoric acid sulfate and their derivatives have excellent corrosion resistance in at the same time provide more than copper alloy in seawater corrosion resistance
Monel400 and deformation processing of nickel - copper nickel base alloy, has the very good resistance to sea water corrosion and chemical corrosion resistance, strong chloride stress corrosion cracking resistance of the alloy is one of the few can use the alloy in fluoride in hydrofluoric acid and fluorine gas medium has the very good oxide stress cracking corrosion resistance, such as salt water environment
in Acid medium,Water corrosion,High temperature corrosion,Ammonia.Monel 400 can play an excellent anti-corrison performance
Mesh is normally knit from wires ranging in diameter from .0035” to .0200”. In special applications, Metal Textiles has knit wires ranging in diameter from .0005” to .0350”. These wires can be round or flat such as those used in Metal Textiles copper gauze for cleaning and in air-filtration applications where large surface areas of wire are needed. A round wire when flattened has approximately twice as much surface area.
In filtration applications, wire diameter is perhaps the most important design variable. It directly affects flow, dirt holding capacity, pressure drop and cost. In general, larger diameter wire allows for higher flow but provides lower dirt holding capacity. Also, larger diameter wire is less expensive. Therefore, a balance must be struck between using a higher density filter of higher cost fine wire or a lesser density filter using lower cost heavy wire.
Density refers to the mass of material per unit volume. It is related to the density of the original mesh and the amount of forming pressure used to compress the mesh into its final form. Determining the required mesh density to produce the specified final product density is a critical step in the design process. Proper density ensures optimal performance of the sealing, gasketing, filtration, heat transfer and separation applications.
Metal Textiles engineers are expert at determining proper density for specific requirements.
8.Monel Wire mesh demister pads Property
Monel alloy is a nickel metal added as the matrix alloy made of other elements such as copper,iron, manganese and so on.it has good corrosion resistance,and it is silvery white.In the fluorine gas,hydrofluoric acid,as well as their derivatives it has very good corrosion resistance.it has good corrosion resistance in salt and the molten sale.monel alloy also has good mechanical properties and
9.Hastelloy C276(N10276,2.4819 )chemical composition%
Hastelloy C276 Mechanical properties
Range of melting temperature: 1325-1370
Hastelloy C276 Characteristics
low carbon alloy type, Ni Mo Cr series of nickel-based hartz alloy corrosion resistance to high temperature materials (Hastelloy), because it has excellent high temperature resistance, oxidation resistance, corrosion resistance weld influence area, has good long-term heat stability and machinability, agricultural chemical nuclear facilities in harsh industrial environments, such as biological pharmacy be applied it in wet oxygen sulfurous acid acetic acid, formic acid and the strong oxidizing salt medium also has excellent corrosion resistanceIt is also widely used in chemical industry for its resistance to uniform corrosion and intercrystalline corrosion. The conductivity and thermal conductivity of h + h + are much lower than that of low carbon steel, while the resistivity and expansion rate are much higher than that of low carbon steel
Size and structure can be customized according to customer's drawings or specification data.
Contact Person: Mrs Meredith